dmesg - USU 9 BATTERY USAGE - LOWLATENCY
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-lowlatency (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #56-Ubuntu SMP PREEMPT Mon Jul 7 12:00:03 UTC 2014 (Ubuntu 3.13.0-32.56-lowlatency 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
BIOS-e820: [mem 0x00000000960b0000-0x000000009aabefff] usable
BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Acer Aspire V5-573G/Dazzle_HW, BIOS V2.24 10/22/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009B000000 mask 7FFF000000 uncachable
3 base 009C000000 mask 7FFC000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7F80000000 write-back
7 base 025F600000 mask 7FFFE00000 uncachable
8 base 025F800000 mask 7FFF800000 uncachable
9 base 0260000000 mask 7FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x01fda000, 0x01fdafff] PGTABLE
init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[mem 0x25c000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x25bffffff]
[mem 0x200000000-0x23fffffff] page 1G
[mem 0x240000000-0x25bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x94caffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x94bfffff] page 2M
[mem 0x94c00000-0x94caffff] page 4k
init_memory_mapping: [mem 0x960b0000-0x9aabefff]
[mem 0x960b0000-0x961fffff] page 4k
[mem 0x96200000-0x9a9fffff] page 2M
[mem 0x9aa00000-0x9aabefff] page 4k
BRK [0x01fdb000, 0x01fdbfff] PGTABLE
BRK [0x01fdc000, 0x01fdcfff] PGTABLE
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x348ea000-0x3646cfff]
ACPI: RSDP 00000000000fe020 000024 (v02 ACRSYS)
ACPI: XSDT 000000009affe210 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 000000009aff8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 000000009afe6000 00E7C5 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 000000009afba000 000040
ACPI: UEFI 000000009affd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 000000009affb000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASF! 000000009aff9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 000000009aff7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 000000009aff6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 000000009aff5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 000000009afe4000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: LPIT 000000009afe3000 000094 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 000000009afe1000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 000000009afe0000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 000000009afdf000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afde000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afdb000 002EED (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 000000009afd7000 00287C (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: SSDT 000000009afda000 0008B6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
NODE_DATA [mem 0x25f5f8000-0x25f5fcfff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x94caffff]
node 0: [mem 0x960b0000-0x9aabefff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x25f5fffff]
On node 0 totalpages: 2067548
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9755 pages used for memmap
DMA32 zone: 624320 pages, LIFO batch:31
Normal zone: 22488 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86784 r8192 d23808 u262144
pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2035220
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8027356K/8270192K available (7378K kernel code, 1132K rwdata, 3400K rodata, 1324K init, 1440K bss, 242836K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1016 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.681 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.36 BogoMIPS (lpj=2294681)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e67000 - ffffffff81e6d000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28496 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18357.44 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:18:41, date: 07/12/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ae7dc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121114)
ACPI: SSDT 000000009ae7d618 0005AA (v01 PmRef ApIst 00003000 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20121114)
ACPI: SSDT 000000009ae7cd98 000119 (v01 PmRef ApCst 00003000 INTL 20121114)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20121114)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb3610000-0xb3613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb3600000-0xb360ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb3618000-0xb361801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb3614000-0xb3617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb361c000-0xb361c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb361b000-0xb361b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb3619000-0xb36190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:00.0: [168c:0034] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xb3500000-0xb357ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:05:00.0: [10ec:5287] type 00 class 0xff0000
pci 0000:05:00.0: reg 0x10: [mem 0xb3405000-0xb3405fff]
pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:05:00.1: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [io 0x4000-0x40ff]
pci 0000:05:00.1: reg 0x18: [mem 0xb3404000-0xb3404fff 64bit]
pci 0000:05:00.1: reg 0x20: [mem 0xb3400000-0xb3403fff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs ETD0508 PNP0f13 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0x9fa21000-0x9fa21fff] has been reserved
system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x9ff00000-0x9fffffff pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xb3700000-0xb37fffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0x9ff00000-0x9ff0ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xb3500000-0xb35fffff]
pci 0000:00:1c.2: bridge window [mem 0x9ff00000-0x9fffffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xb3700000-0xb370ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xb3400000-0xb34fffff]
pci 0000:00:1c.3: bridge window [mem 0xb3700000-0xb37fffff pref]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:1c.4: PCI bridge to [bus 01]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb2000000-0xb2ffffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fcfffff]
pci_bus 0000:02: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xb3500000-0xb35fffff]
pci_bus 0000:04: resource 2 [mem 0x9ff00000-0x9fffffff pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0xb3400000-0xb34fffff]
pci_bus 0000:05: resource 2 [mem 0xb3700000-0xb37fffff pref]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb2ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28172K (ffff8800348ea000 - ffff88003646d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1405178321.871:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15733
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 9c10 ss_vid 1025 ss_did 79b
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (52 C)
GHES: HEST is not enabled!
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb361c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-lowlatency ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-lowlatency xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-32-lowlatency xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: a2a0888688580074975ba1eecaf43c3f663aa91d'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:768:335
tty tty56: hash matches
rtc_cmos 00:04: setting system clock to 2014-07-12 15:18:42 UTC (1405178322)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1324K (ffffffff81d1c000 - ffffffff81e67000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
rtsx_pci 0000:05:00.0: irq 61 for MSI/MSI-X
rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 61
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.1: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.1: irq 62 for MSI/MSI-X
r8169 0000:05:00.1 eth0: RTL8411 at 0xffffc90010c9a000, 08:9e:01:f1:02:c9, XID 1c800800 IRQ 62
r8169 0000:05:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: irq 63 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb361b000 port 0xb361b100 irq 63
ata2: DUMMY
ata3: DUMMY
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: irq 64 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: new high-speed USB device number 2 using xhci_hcd
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
usb 2-3: New USB device found, idVendor=064e, idProduct=e330
usb 2-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 2-3: Product: HD WebCam
usb 2-3: Manufacturer: SuYin
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 2-4: new full-speed USB device number 3 using xhci_hcd
usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
usb 2-4: New USB device found, idVendor=04ca, idProduct=3006
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
tsc: Refined TSC clocksource calibration: 2294.687 MHz
random: nonblocking pool is initialized
usb 2-5: new low-speed USB device number 4 using xhci_hcd
usb 2-5: New USB device found, idVendor=1d57, idProduct=001d
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: HID compliant-mouse
usb 2-5: Manufacturer: HID compliant-mouse
usb 2-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID compliant-mouse HID compliant-mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input7
hid-generic 0003:1D57:001D.0001: input,hidraw0: USB HID v1.10 Mouse [HID compliant-mouse HID compliant-mouse] on usb-0000:00:14.0-5/input0
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff880253901140), AE_NOT_FOUND (20131115/psparse-536)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input8
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:48: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Switched to clocksource tsc
raid6: sse2x1 7300 MB/s
raid6: sse2x2 10023 MB/s
raid6: sse2x4 11824 MB/s
raid6: avx2x1 15437 MB/s
raid6: avx2x2 18148 MB/s
raid6: avx2x4 20742 MB/s
raid6: using algorithm avx2x4 (20742 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 22936.000 MB/sec
bio: create slab at 1
Btrfs loaded
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[416]: starting version 204
type=1400 audit(1405178352.598:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
type=1400 audit(1405178352.598:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
type=1400 audit(1405178352.598:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
type=1400 audit(1405178352.598:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
type=1400 audit(1405178352.598:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
type=1400 audit(1405178352.598:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
wmi: Mapper loaded
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
Linux video capture interface: v2.00
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
uvcvideo: Found UVC 1.00 device HD WebCam (064e:e330)
input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: multipath: version 1.6.0 loaded
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
usbcore: registered new interface driver btusb
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
usbcore: registered new interface driver ath3k
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
SKU: Nid=0x1d sku_cfg=0x40f89b2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000008
SKU: customization=0x0000009b
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x12
realtek: No valid SSID, checking pincfg 0x40f89b2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9b2d CODEC_ID=10ec0282
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input15
input: Acer BMA150 accelerometer as /devices/virtual/input/input16
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90021a00000, irq=18
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
intel_rapl: domain uncore energy ctr 9377:9377 not working, skip
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.24 Wed Jul 2 14:24:20 PDT 2014
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (895) killed by TERM signal
type=1400 audit(1405178359.316:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.316:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.316:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.316:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.316:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.317:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1028 comm="apparmor_parser"
type=1400 audit(1405178359.320:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1027 comm="apparmor_parser"
type=1400 audit(1405178359.320:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1027 comm="apparmor_parser"
type=1400 audit(1405178359.320:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1027 comm="apparmor_parser"
type=1400 audit(1405178359.328:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=1042 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: samba-ad-dc main process (946) terminated with status 1
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP05.PEGP
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.1 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x104 offMax=0xccc
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.12 (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
[drm] Module unloaded
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2625) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with c8:3a:35:38:34:c8
wlan0: send auth to c8:3a:35:38:34:c8 (try 1/3)
wlan0: authenticated
wlan0: associate with c8:3a:35:38:34:c8 (try 1/3)
wlan0: RX AssocResp from c8:3a:35:38:34:c8 (capab=0x411 status=0 aid=2)
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: associated
init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory